Toyota Intelligent Tester II

 Toyota denso intelligent tester II 

 FUNCTION:

 

All types of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II vehicles beyond Toyota. 

 

DENSO Diagnostic Tester-2 (DST-2) for TOYOTA & LEXUS enables you to diagnose electronic control systems for engines, ABS's and airbags, even through Communication Diagnosis DST- 2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional. 

 

Easy operation on LCD display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and Oscilloscope Not only communication basis diagnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your PC saved data such as data-list can be downloaded to your PC.

 

 

DST-2 Main Unit Specification:

 

Dimensions: 145mm (W) x 223mm (H) x 71mm (D) 

 

Weight: Approx. 1380g 

 

Source Voltage: DC10-32V 

 

Power Consumption Normal: 7W (12VDC), Charging: 10W (12VDC) 

 

Operation Temperature: 0~45C 

 

Storage Temperature: -10~60C 

 

LCD display: 5.7 inch color STN (320x240), transparent type of 256 colors Adjustable brightness/contrast 

 

Touch panel Input: by finger or stylus pen 

 

Key: 4 (up, down, two function keys) 

 

Built-in clock for a time stamp 

 

PC Communication: PC card slot CFx1ch (CF standard type I, II) 

 

USB Host: 1ch.

 

 

Function: 1ch Serial 1ch (RS-232C) Vehicle communication CAN, ISO9141 

 

Back up power supply: Lithium-ion battery 7.4v 1000mAH Recharge hour ( at normal temperature) Approximate operating time: 5 hours ( fully discharge to full charge) 80 minutes (normal operation) Voltage Measurement Function Items Specification Maximum sampling rate 250s/sec Input channel 1ch Voltage range ( vertical scale) 1V/div, 2V/div, 5V / div Time range ( horizontal scale) 100ms / div, 200ms / div, 10s / div Oscilloscope Function Items Specification Maximum sampling rate 500ks/sec Input channel 2ch Trigger functions Mode Auto, normal, single Trigger 10%, 50%, and 90% of the monitor Voltage range ( vertical scale) 100mV / div, 200mV / div, 500mV / div ~10V / div Time range ( horizontal scale) 5us / div, 100us / div, 200us / div, ~10s / div( 200ms and higher is the Roll mode)

 

 

Package List:

 

- Mainframe -- 1pc 

 

-OBD-II -- 1pc 

 

-Charging line -- 1pc 

 

-Lin line -- 1pc 

 

-Measuring leads for multimeter 1 -- 1pc

 

- Measuring leads for multimeter 2 -- 1pc 

 

 

Update and Warranty: 

 

- Update for free for one year by sending software by internet.

 

- One Year Warranty

 Toyota denso intelligent tester II:

 FUNCTION:

 

All types of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II vehicles beyond Toyota. 

 

DENSO Diagnostic Tester-2 (DST-2) for TOYOTA & LEXUS enables you to diagnose electronic control systems for engines, ABS's and airbags, even through Communication Diagnosis DST- 2 realizes more accurate diagnosis through CAN communication that speed is 50 times faster than conventional. 

 

Easy operation on LCD display with touch panel 5.7inch full color display with touch panel assists an easier operation. Voltmeter and Oscilloscope Not only communication basis diagnosis [Diagnostic code, ECU data monitor, Active test], but also voltmeter and oscilloscope detect alteration in the electric signal to find out the troubling part. Data recording to your PC saved data such as data-list can be downloaded to your PC.

 

 

DST-2 Main Unit Specification:

 

Dimensions: 145mm (W) x 223mm (H) x 71mm (D) 

 

Weight: Approx. 1380g 

 

Source Voltage: DC10-32V 

 

Power Consumption Normal: 7W (12VDC), Charging: 10W (12VDC) 

 

Operation Temperature: 0~45C 

 

Storage Temperature: -10~60C 

 

LCD display: 5.7 inch color STN (320x240), transparent type of 256 colors Adjustable brightness/contrast 

 

Touch panel Input: by finger or stylus pen 

 

Key: 4 (up, down, two function keys) 

 

Built-in clock for a time stamp 

 

PC Communication: PC card slot CFx1ch (CF standard type I, II) 

 

USB Host: 1ch.

 

 

Function: 1ch Serial 1ch (RS-232C) Vehicle communication CAN, ISO9141 

 

Back up power supply: Lithium-ion battery 7.4v 1000mAH Recharge hour ( at normal temperature) Approximate operating time: 5 hours ( fully discharge to full charge) 80 minutes (normal operation) Voltage Measurement Function Items Specification Maximum sampling rate 250s/sec Input channel 1ch Voltage range ( vertical scale) 1V/div, 2V/div, 5V / div Time range ( horizontal scale) 100ms / div, 200ms / div, 10s / div Oscilloscope Function Items Specification Maximum sampling rate 500ks/sec Input channel 2ch Trigger functions Mode Auto, normal, single Trigger 10%, 50%, and 90% of the monitor Voltage range ( vertical scale) 100mV / div, 200mV / div, 500mV / div ~10V / div Time range ( horizontal scale) 5us / div, 100us / div, 200us / div, ~10s / div( 200ms and higher is the Roll mode)

 

 

Package List:

 

- Mainframe -- 1pc 

 

-OBD-II -- 1pc 

 

-Charging line -- 1pc 

 

-Lin line -- 1pc 

 

-Measuring leads for multimeter 1 -- 1pc

 

- Measuring leads for multimeter 2 -- 1pc 

 

 

Update and Warranty: 

 

- Update for free for one year by sending software by internet.

 

- One Year Warranty